Skip to content
Repair and Remodel
Menu
Finished bathroom floor in large-format grey porcelain with tight grout lines meeting a white subway-tile shower wall with a tiled niche

The finished look

Tile installation, floors to showers.

Porcelain, ceramic and stone tile on floors, walls, backsplashes and showers across Broward and Palm Beach County. Flat, level substrate first. Written quote after a visit.

Get a free estimateSee what most jobs cost

5.0 from 19 reviewsSince 2020 in PlantationMarine Corps veteranOne year on our work

  • 5.0

    on Google from 19 reviews, every one word for word

  • 2 wk

    on site for a full bath, 7 to 10 working days for a tub-to-shower

  • 1 yr

    on our work, the Done Right Promise

  • USMC

    Marine Corps veteran, Brad runs every job, fully insured

Floors, walls, backsplashes, showers

Tile is the part of a bathroom people notice first and the part I'm pickiest about.

The same crew that tiles our showers sets the rest of the house.

  • Bathroom, kitchen, laundry and foyer floors in porcelain, ceramic or stone
  • Kitchen backsplashes: subway, stacked, herringbone, large slab-look porcelain
  • Shower walls, floors and niches over real waterproofing
  • Tub surrounds and half-height wainscot in bathrooms
  • Accent walls and fireplace surrounds

The substrate decides how long the tile lasts

Tile is rigid. If the slab under it has a hump or a dip, large tile rocks and cracks at the grout line within a year or two.

So before anything is set I check the slab with a long straightedge and fix what I find.

  • Old thinset ground off, not tiled over
  • Dips filled and humps ground so the floor is flat enough for the tile size
  • Cracks in the slab treated with a crack isolation membrane before tile crosses them
  • Cement board and sheet waterproofing on walls that get wet
  • Movement joints at doorways and where the tile meets another floor

Porcelain, ceramic or stone

Three materials, three different jobs to set.

I'll tell you on the visit which one fits the room and the budget.

  • Porcelain: the hardest and least absorbent, right for floors and showers, no sealing. Harder to cut, which is on the quote.
  • Ceramic: lighter and softer, fine for walls and backsplashes, the most affordable to buy and to set.
  • Natural stone, marble or travertine: beautiful, porous, needs sealing once a year and careful setting so the veins line up. More setting time, more care with grout.

Get a free estimateor call or text (954) 242-5924

Large-format tile on a South Florida slab

Most of the tile people pick now is 24 by 24 or 24 by 48 inches, and most of the houses I work in sit on a concrete slab poured decades ago.

Big tile on an old slab is where the craft shows. The flatter the floor and the better the thinset coverage, the fewer the lippage edges you'll catch with a bare foot.

  • Large-format thinset, back-buttered, with a notched trowel sized to the tile
  • A leveling system on big tile so edges stay even while it cures
  • Offsets kept to a third on rectangular tile so the slight bow in each piece doesn't show
  • Layout centered on the room so the cuts land at the walls, not in the doorway

What the quote covers, and what it doesn't

The written quote lists demo, prep, setting, grout and clean-up as fixed lines.

Tile is either bought by you or sourced by me and shown at its own line, so you can see what the material costs apart from the work. If a toilet or a vanity has to come up for a floor, resetting it on its existing lines is in the quote; moving a drain is the licensed plumber's part and is listed separately.

How a tile job runs

  1. Step 1

    Measure and lay out

    The room measured, the tile size and pattern confirmed, and the layout chalked so the full tiles sit where you look and the cuts hide at the edges.

  2. Step 2

    Prep and level

    Old floor out, slab ground flat, cracks treated, cement board and waterproofing on wet walls. This is the day that decides the rest.

  3. Step 3

    Set

    Thinset back-buttered, tile set with a leveling system, niches and edges trimmed with metal or bullnose. The room is off limits while it cures.

  4. Step 4

    Grout, seal, clean

    Grout packed and washed, caulk at every change of plane, stone sealed, fixtures reset, and the room swept and wiped down.

Tile installation prices

Tile is quoted after a visit because the substrate, the tile size and the pattern move the labor more than the square footage does.

  • Tile installation

    Written quote

    Floors

    Demo, slab prep, setting, grout and clean-up. Tile at its own line.

  • Tile installation

    Written quote

    Backsplashes and walls

    Layout, setting, grout and caulk. Outlets extended to the new surface by the licensed electrician.

  • Tile installation

    Written quote

    Shower walls and floors

    Cement board, waterproofing, pan, tile, niche and bench where there's room.

Get your written number

Every quote is written, itemized and fixed before we start. The tile line is separate so you can see material apart from labor.

On every tile quote

Included

  • Demo and haul-away of the old floor or wall
  • Slab leveling and crack treatment
  • Cement board and waterproofing where needed
  • Layout, setting, grout, caulk and clean-up
  • Fixtures pulled and reset on their existing lines

Brought in when needed

  • A licensed plumber if a drain or supply line moves
  • A licensed electrician for outlet extensions, replacements or additions behind a backsplash

Your choices

  • Porcelain, ceramic or stone
  • Tile size, pattern and offset
  • Grout color and width
  • Metal edge trim or bullnose
  • Buy the tile yourself or have me source it

Often built together

Where we do this work.

All locations

Tile installation questions

Something else on your mind? Call or text (954) 242-5924.

How do you price tile installation?

After a visit, in writing. Square footage is only part of it. The slab condition, the tile size, the pattern and how many cuts the room needs move the labor more than the area does. The quote lists prep, setting and grout as fixed lines and the tile as its own line.

Can you tile over existing tile?

I don't. Tile over tile raises the floor at every doorway, hides cracks that come through later, and the bond is never as good as thinset on a prepared slab. The old floor comes out and the slab gets flattened. It costs more up front and it's the floor you keep.

Is large-format tile a problem on an older slab?

Only if the slab isn't flat. Big tile shows every hump as a raised edge. I grind and fill the slab first and set with a leveling system, which is why prep is its own day on the schedule.

Should I pick porcelain, ceramic or natural stone?

Porcelain for floors and showers, no question. Ceramic is fine for a backsplash and costs less. Stone is the prettiest and the most work: it needs sealing every year and careful setting. I'll walk you through it on the visit with the actual room in front of us.

Do you waterproof shower tile?

Always. Cement board and sheet waterproofing on the walls, a sloped pan with a membrane on the floor, and a flood test before tile goes on. Tile and grout are not waterproof on their own; what's behind them is what keeps the wall dry.

Get a free estimate.

Tell me which rooms, what's on the floor or wall now, and the tile you like if you've picked one. I usually reply the same day.

Mon to Fri
8 to 5
Sat
9 to 4
Sun
closed

I usually reply the same day.

No pressure, ever. Your details go to Brad, the crew and licensed trades on your job, and the customer and email services that handle your request. We never sell your information. Privacy policy.

Picked a tile? Let's set it right.

Tell me the room and the tile you're looking at. A free visit, a written fixed price, the same crew that tiles our showers.

Get a free estimateCall (954) 242-5924

Call (954) 242-5924